1. Can I still use half of the beautifying agent?

The beauty seam products produced by regular manufacturers are all healthy and environmentally friendly, and the properties of their materials are relatively stable and will not be easily affected by the environment. However, it must be placed in a cool and dry place when storing, and remember to avoid direct sunlight, and the used beautifying agent must be removed and replaced with a tube head and tightened to prevent the beautifying agent from contacting with air and oxidizing. Replace the hose when you use it next time, and use it after 30cm-40cm is the same. However, any product has a certain storage period and must be used up within the warranty period. It is recommended to use it up at one time, so I remind everyone that when making beautiful joints at home, please consult us clearly about the size of the gap in the home, what is the area, how much you need to use, and then buy it, which will not waste or save unnecessary trouble.

2. How many square meters can a set of beauty joints make?

The amount of beauty joint agent depends on the size of the floor tiles. The reserved tile gaps are all related. The larger the tile gap, the more the loss of the beauty joint agent (the dosage table is attached)

Dosage Brick joint 1MM 1.5MM 2MM 2.5MM 3MM

Tile size

800*800MM 21㎡/group 17.00 14.00 11.00 8.50

600*600MM 16㎡/group 13.00 11.00 8.50 6.00

400*800MM 14㎡/group 12.00 11.00 7.50 5.50

500*500MM 13㎡/group 11.00 10.00 7.00 5.00

300*600MM 10.5㎡/group 8.50 8.00 5.50 4.00

400*400MM 10.5㎡/group 8.50 9.00 5.50 4.00

300*300MM 8㎡/group 6.50 6.00 4.00 3.00

200*200MM 5㎡/group 4.00 3.50 2.50 2.00

100*100MM 2.5㎡/group 2.00 1.80 1.50 1.00

50*50MM 1.5㎡/group 1.00 0.80 0.60 0.50

3. How to distinguish between good and bad beauty seams?

It can be distinguished from the aspect of smell first, there is a pungent smell, indicating that the product has more harmful gases, and then from the aspect of color and luster, after the seam agent is dry, the gloss is good, relatively smooth, and it looks shiny from a distance, and you can see the beauty The hardness of the grout should be soft and rigid, with good toughness.

4. It is difficult to apply beauty seam agent to glue?

Reason 1: Check whether the seam agent in the mixed glue nozzle has been cured. Generally, if we pause for about 15 minutes during the sizing process, the beauty joint may be semi-cured or cured, which will block the glue nozzle and cause difficulty in dispensing. This requires us to replace the new mixing nozzle;

Reason 2: Check if the glue nozzle cut is too small. Generally, we will cut the corresponding 45° bevel according to the width of the tile gap. When the incision is too small, it will be more difficult to apply the glue. Therefore, the beauty joint construction is really a physical task. Don't be blindly confident. It is recommended that friends with poor physical fitness can ask the construction master to carry out the construction.

Reason 3: The beauty joint agent is also affected by the characteristics of thermal expansion and contraction, so generally when the external environment temperature is relatively low, the curing agent will be more stiff and sticky and difficult to extrude. At this time, we can use warm water at 50-60℃ to heat it. It should be noted that the beautifying agent needs to face up and the warm water should not flow over two-thirds of the bottle.

Reason 4: If the pressure control knob of the glue gun is too small, it will cause the glue gun to fail to discharge the material. You can slowly turn the knob to large in the direction indicated by the "+" sign and try the gun again;

Reason 5: The quality of the glue gun is not good enough. If it is an inferior glue gun, how can the glue gun not have enough pressure to make it effortlessly? So a good glue gun can save us a lot of effort in construction.

5. Which is better, water-based or oil-based beauty joint agent?

The stability and service life of water-based beautifiers are not as strong as that of oily beautifiers, and in terms of aesthetics, the oiliness is obviously better, because oily substances will make the gloss and brightness of the beautifier become higher, so no matter how polished Brick or glazed brick is very suitable.

6. How to match the colors of ceramic tiles and beautiful seams?

Recommendation 1: Match the same color, such as the matching of light yellow brick and dark yellow beauty joint agent, black brick and gray beauty joint agent.

Recommendation 2: Match dark tiles with light-colored beautifiers, such as black and white, dark and light, dark green and light gray.

Suggestion 3: The combination of cool and warm colors. The relationship between cool and warm colors depends on contrast, which is produced by people's natural life experience, and the combination is also very distinctive

Recommendation 4: Match infinite colors with colors. Black, white, gold, silver, and gray are called infinite colors. They can be matched with any color.

Generally speaking, the black, white, silver, and gray seam agents are more versatile and can be matched with tiles of various colors without being obtrusive.

If you want a strong contrast color, you can choose a color with a larger hue. In addition, the specific combination should also consider factors such as environment and personal preferences.

7. How long does it take for the tiles that have just been pasted to be beautiful?

1) In terms of time, there is generally a certain amount of standing and curing time after the paving is completed (the tile adhesive has a certain amount of moisture after the tile has just been pasted, and the beautiful seam will easily get damp if the seam is not dried. Causes whitening and shedding), after this time, the beauty sewing can be performed. The industry stipulates the time, generally after 7 days, the seam agent can be treated.

2) In terms of the order of the decoration process, since the beautiful joints of ceramic tiles have high requirements for the on-site construction environment, the beautiful joints of tiles are carried out after the construction processes that are prone to dust and stolen goods, such as water, electricity, woodworking, etc.

3) In addition, the temperature of the construction site should be kept at about 5-30C°. If you encounter successive rainy weather, you need to wait until the weather is clear before proceeding, so as to ensure the effect of the beautiful seam of the tiles.

4) The beautiful seam of tiles in the living room is generally before all the living room furniture enters the market, so that on the one hand, it can ensure the decoration effect of the beautiful seam, and on the other hand, it can also be easy to clean.

5) The bathroom and kitchen are one of the important functional areas in the home. After a week of standing, you can apply the beautifying agent. Remember to be before the ceiling to ensure the integrity of the beautifying.

8. What kind of tiles need masking paper or seam wax?

If the surface of the tile is very rough, it is not smooth at all (such as antique tiles, wood grain tiles). When making beautiful seams, the seamstresses will use masking paper or waxing to prevent the seam from directly hitting the tiles. Its main function is to protect the two sides of the seam during the seam. The tile surface is not polluted, and it can also bring a lot of convenience to cleaning. The beauty of seam wax only needs to use wax blocks to apply a uniform layer along the tiles on both sides of the gap. The operation is simple and practical, and the inherent characteristics of wax will also make the beauty seams more bright and beautiful. Compared with the seam wax, the operation of the masking paper is more troublesome. It must be accurately attached to the edge of the tile, which wastes a lot of construction time. At the same time, the operator will be very tired, but clean and hygienic It will be simpler, just tear off the textured paper.

9. Why doesn't the beauty sealant solidify for a long time after finishing?

1) Uneven mixing of beauty joints: Many people find that there is a section of uncured beauty joints at every interval when cleaning the remaining material after the beauty joint construction. This is the common reason why the beauty joints do not cure. During the construction of the joint agent, the glue nozzle is mixed unevenly. Because the double-tube beautifying agent is composed of two pipes of raw materials mixed, and the inside of the glue nozzle is a plastic head with a spiral, when the two pipes of raw materials pass through the nozzle tube, they are mixed together due to the action of the spiral, so that the beautifying agent produced Will be even. The first section of the beautifying agent that has just been punched out is easy to mix unevenly. Before the beautifying joint construction, the beautifying agent must be sprayed out of 30cm-40cm before starting the construction. This can be mixed evenly.

2) The quality of the beauty seam agent is poor. The beauty seam agent on the market is endless, and the quality is also uneven. The inferior beauty seam agent will be very thin and will not cure for a long time. This is because the raw material ratio of the beauty joint agent is not up to standard. In order to save costs, the epoxy resin, pigment, curing agent and other raw materials used are very cheap, especially the inferior curing agent, which is the main cause of the beauty joint agent not curing. . If you encounter a pungent, too thin beautifying agent, do not use it.

3) The indoor temperature is too low: If the indoor temperature is lower than 5℃ when performing beautiful joint construction in winter, the solidification will be slow after beautiful joint construction.

4) The tile gap is wet and not dry: If the tile gap is severely damp, the beautiful seam made will either be incompletely cured or turn white and discolor after curing. Because the beauty grout seals the tile gaps, the moisture in the tile gaps cannot be released, which will affect the curing of the beauty grout. Therefore, moisture is an important reason for the curing of the beauty grout. It is recommended to stop the construction immediately, open the doors and windows for ventilation, and wait for the humid environment to dry before doing the beauty joint construction, so that the beauty joint agent will not solidify and cause rework.

5) In addition to the above reasons, there is another problem that can easily be overlooked by the glue gun. There are four main screws on the front and back of the stretch rod of the glue gun. These four screws are the power of the glue gun. Once there is a screw If it is loosened, the output pressure of the glue gun will deviate severely during the construction of the glue gun, and the pressure on the left will be 70% and the pressure on the right will be 30%. That is to say, when discharging 70% of the material while discharging 30% of the material, there is no formation and the force is 100% each, which makes the discharging and mixing of the beauty joint agent uneven. Two-component beautifying agent is a combination of AB and two groups, which requires simultaneous force to discharge uniformly.

Under normal weather conditions, after the application of the beauty joint agent, the initial curing can be achieved in 4-6 hours, and the complete curing can be achieved within 24 hours (the time will be extended in winter when the temperature is lower)

Now decorating a house is really a chore. The complexity of decoration materials on the market and the variety of decoration styles can make people tangled for a long time. Especially in the past, the floor tiles may be simply filled with white cement, but now they are all popular!

Beautiful seam for tiles is a popular decoration operation in recent years. After the tiles are filled with seam agent, there will be no blackening phenomenon even after a long time, and the appearance is more beautiful. . However, the prices of beauty sutures on the market today are different, how to ensure the quality? Now I will teach you 5 tricks so that you will not be easily deceived!

1. From the smell

Odor is a good way to identify the quality of beauty joints. Because the beauty seam agent itself is a kind of chemical agent, it will definitely be mixed with the smell of some chemical reagents. If your home is in the beauty seam, the pungent smell is very strong, which shows the quality of the beauty seam agent Poor. Because the better seam agent has little smell. Therefore, to identify the quality of the beauty suture, everyone can smell it.

2. From the perspective of viscosity

Because the beauty seam agent itself is colloidal, it will have a certain degree of adhesion. At this time, a good seam agent will be more viscous and sticky, so that the seam agent will have a longer service life, and there is no need to worry about moldy for a long time. On the contrary, the thinner seam agent is inferior because it has no viscosity at all and will fall off very quickly.

3. From the perspective of coagulability

After the construction of the beauty grout is completed, it is equivalent to solidification in the cracks of the tiles. This time is the time to test the quality of the beauty grout. We can squeeze a little beautifying agent on the outside, and wait until it is naturally air-dried to observe its coagulability. If it is harder, it is of better quality. On the contrary, the soft and collapsed type is not good at preventing mildew. Will have a good effect

4. From the perspective of gloss

The sensuality of the beautiful seam of tiles is to look more beautiful. At this time, if the gloss of the beautiful seam is better, it will look shining from a distance, but the poorer quality seam will not look It's very bright, and it may start to slowly become black after a long time, so that it does not play a role in beautiful sewing at all.

5. From the perspective of contractility

The beautiful seams are concentrated in the gaps of the tiles. After we apply the beautiful seam agent, the solvent will gradually shrink inward by itself and then solidify in the gaps. In this case, if the shrinkage is too large, the quality of the seam agent is problematic, and if it is relatively small, the quality will be considerable.

Most owners will choose ceramic tiles as facing materials for walls and floors, especially in kitchen and bathroom spaces. Tiles will have gaps when they are laid, so why are there gaps when laying tiles? How to deal with this tile gap? For tile gaps, the commonly used jointing materials now include cement, jointing agent and putty powder, among which putty powder and white cement are more traditional joint filling materials, and most of them are now used on cultural tiles for balcony paving. Many balcony tiles use ordinary cement mortar directly when paving. The main reason is that the waterproof performance and scrub resistance of putty powder and white cement are worse than the jointing agent. Nowadays, people use less, especially in the wall and floor of the kitchen and bathroom, and the floor of the living room. Most of them choose tile grout, such as ACI Baomei grout.

Aicibaomei seam agent adopts a unique plastic bottle container to match the static mixing nozzle. After the glue is squeezed by the glue gun, the glue is fully mixed, and the reaction solidifies and forms. After forming, it can achieve the effect of high hardness and strong adhesion. At the same time, it has the advantages of non-shrinkage, non-mold, washable, resistant to blisters, oil, acid and alkali, and aging. It is suitable for all kinds of gaps in counters, window sills, furniture, cabinets, kitchen corners, bathroom corners, and can also be used to paste various hard materials. It can be used with the color of tiles. It can be glued and waterproof. mold.

1. Floor heating has no effect on the beauty joints. The high temperature resistance of the beauty joints is 100 degrees Celsius, so even if the floor heating is installed in your home, you can safely make beautiful joints. Just use real porcelain with excellent flexibility and will not cause tile tension. porcelain.

2. The requirements for beautiful seam construction are dry, and dust-free. Many processes in home improvement will generate a lot of dust, such as painting, ceiling, wallpaper and so on. Therefore, the beauty joint construction time is before these dust-prone processes. Otherwise, there will be too much dust in the gap, and it will be troublesome to clean up, and the construction effect will not be good.

3. The beauty joint agent should be stored in a cool, dry and ventilated warehouse at 5℃-35℃, and the construction temperature should be within the range of 15℃-30℃. If the temperature is too low, it will hinder the loss of water and solidification of the material due to slow evaporation of water or freezing; if the temperature is too high, the solidification effect will be affected due to the fast evaporation of water.

4. Beautiful seam agent must use seam wax or paste seam paper on antique tiles. Because the surface of antique bricks is hard to clean after curing. The time to tear the seam paper is very important. After the seam agent is smoothed, it should be torn off immediately. Friends who use beautiful seam wax can omit this step and only need to put the beautiful seam wax on the edge of the gap to achieve the same effect.

5. If you find that the product is difficult to produce, you might as well soak the product in warm water for half an hour before using it. After the product is taken out of the water, wipe the appearance clean before using it to avoid dripping into the cracks and affect the construction effect.

6. After cleaning the tile gap, use a vacuum cleaner to clean the gap again. Then, wipe the gap and both sides with a semi-dry towel, and then start construction.

7. In the process of cleaning tile gaps, use a brush to clean up the dust. When the brush is cleaning dust, it must follow the gap, sweep to both sides, and then gather it together to clean it up.

8. Before punching the material of the beautiful sewing product, be sure to punch out about 30cm of material and discard it, and then drive it into the gap. When a set of products is finished, when replacing a new product, the mixing tube must be replaced with a new one. At the same time, the 30CM material at the front end must be discarded.

9. When performing seaming work, whether using a seaming ball, a seaming rod, or a squeegee, after pressing the seam once, wipe the seam-beauty agent on the seam ball or the squeegee clean, and then Return to the gap for a second press.

10. The punching is done in a straight line shape. For the places that are not hit or not full, you must re-punch. If you hit too much material, you can clean up, but if there is less material, there will be gaps or failures. Leveling will affect the construction effect.

11. For the beautiful seam treatment of tile gap intersections or T-shaped intersections, first press in one direction, and then place the steel ball in the center of the cross angle to press in the other direction respectively. When the steel ball is started, the handle angle is increased and the lifting is accelerated. Reduce the concavity of the joint at the start of the steel ball.

12. After the seam and seam are all finished, the site must be protected before it is completely cured. Do not step on the seam at will, let alone step on the finished seam, otherwise you will have to clean up and re-construct.

13. The curing time of beautiful sewing products is affected by environment and temperature. The normal curing time is about 6-8 hours for early drying in summer and about 10 hours for early drying in winter. But it will cure within 24 hours normally. Therefore, the remaining material should not be cleaned for more than 24 hours.

14. If there is still part of the two-component beauty joint agent that does not dry after 24 hours, the main reason is that the epoxy resin and the curing agent are not completely mixed, causing it to not dry. Generally, there is no need to wait in this case, because this This situation is impossible to dry any more, you can only pick up the un-done and re-apply. This is a normal phenomenon of two-component beauty joint agent. It is recommended not to finish the construction at one time, leaving some remaining material for repair.

15. Make the tile joints for beautiful seams and take care of them in life. Do not poke with sharp objects and avoid strong acid and alkali substances, otherwise it will destroy the components of the seam and affect the service life of the seam.

1. Diversified colors:

(1) Aicibao bright series: porcelain white, shiny silver, ivory white, dark beige, Greek gray, sub-light gray, pearl black and other colors, mainly used with bright tiles such as vitrified tiles, glazed tiles, etc. . The color is gorgeous, the gloss is strong, the texture is fine, and the texture is fine, and the color is more coordinated with the bright tile, and it is a good tile companion.

(2) Aicibao metal series: ivory gold, champagne gold, light gold, gilt gold, shiny gold, noble gold, luxury gold, rose gold, noble silver, luxury silver, noble silver, black gold sand, etc., its color It is gorgeous and full, and has a strong metallic texture. After use, it blooms with a dazzling color. The use of gold and white, black, gold, gray and other color tiles together can better reflect the texture and grade of the tiles.

(3) Aus Morandi matte series: matte white, light silver, vanilla, light gray, dark silver, dark gray, milk coffee and other colors, specially used with antique tiles and matt tiles. Its color and lustre are rich, full, and strong in texture. After use, it shows a dull luster. It is more coordinated with the antique tiles in color and gloss, and can better reflect the grade of the antique tiles; it is a good companion for the antique tiles.

2. Green, environmental protection and others

(1) The decorative effect is particularly strong: the color is rich, natural and delicate, shiny, non-fading, and brings a better overall effect to the wall and the ground

(2) The surface is as smooth as porcelain: The surface is as smooth as porcelain after the beautifying agent is solidified, with high strength, wear resistance, excellent self-cleaning, easy to clean, wipe clean, and can be scrubbed with ceramic tiles; not easy to trap dirt , To prevent the breeding of molds in the crevices and harm human health

(3) Waterproof, anti-fouling and never dirty and black: It has the characteristics of waterproof, moisture-proof, impermeable and non-staining, so that the tile joints will never get dirty and black.

(4) Green and environmental protection: advanced materials, non-toxic, tasteless, free of benzene, toluene, and xylene. Comply with "National Standard GB18583-2001" various hazardous substances limit indicators.

(5) Convenient construction: simple operation, easy to learn, and the use effect can be achieved 2 hours after construction.

(6) New materials and new processes: It is made of high-tech new polymer materials and high-end pigments. It is different from white cement, colored joint filler (dry powder cement material + low-grade pigment) is mainly composed of inorganic materials.

1. High hardness, hard as porcelain after construction and curing, but also has a certain degree of flexibility, not easy to break;

2. High brightness, beautiful color and dazzling luster.

3. It will not deform, shrink or sag for a long time. It completely avoids the defect that the single-component beauty joint agent is easy to shrink and collapse and form grooves.

4. Green and environmental protection, no mold, no black. The problem of black and mildew of the existing tile grout is fundamentally solved.

5. The bonding is firm, does not fall off, and is firmly bonded to the substrate after curing.

6. Resistant to washing and blister. It has strong adhesion and can be used in places where water is often soaked in toilets and other places (note: try to avoid construction when there is water or when it is wet).

7. Acid and alkali resistance, corrosion resistance.

8. Good stain resistance

9. The operation is simple, it can be directly scrubbed with water, and there is no need to paste masking paper or tape paper.

10. Don't sag, fill it up. One-time forming, vertical wall can be constructed.

11. A wide range of applicable substrates. It can be used for bonding and filling gaps between different products such as ceramics, stone, mosaics, microcrystalline stones, antique bricks, cement, and metals. Kitchen, bathroom, living room, background wall, floor tile gap.

1. After the tiles are beautifully made, it can avoid water seepage between the gaps of the tiles, achieve waterproof and moisture-proof and anti-permeability, and effectively solve the problem of black and mildew on the tiles.

2. The beauty seam agent is rich in color, has luster and is not easy to fade. According to the decoration style, ceramic tile type, personal preference, etc., choose the appropriate beauty seam agent color matching, which can bring a better overall decorative effect to the home decoration.

3. The beautifying agent has flexibility and can effectively prevent the tile hollowing and cracking caused by thermal expansion and contraction.

4. After the beautiful seam, the brick seams are smooth as porcelain, dirt-resistant and easy to clean, no dirt and dirt are hidden, no matter how dirty things can't be cleaned in the seams, the home becomes cleaner.

Anti-fouling and easy to clean, completely solve the problem of black mold on tiles

The beauty joint agent is composed of epoxy resin and high-quality pigments, covering the gap surface after curing to form a bright color and a smooth and hard clean surface like porcelain. At the same time, the product has the characteristics of high bonding strength, no collapse, no shrinkage, no cracking, water resistance, stain resistance, easy cleaning, convenient construction, and long service life. It can completely solve the problems of moldy and blackening in the cracks of tiles, and can make your tiles beautify. The effect is better.

And whether it is luxurious gold with luxurious texture or simple and atmospheric silver-gray, the beauty joint agent can jump out of the tile itself and become the protagonist in the space, adding a bright spot to your decoration. At the same time, it can effectively solve the problems of black and yellow tile joints and difficulty in cleaning, bringing more convenience and health to your home life.

Nowadays, there are many styles of beautifying agents on the market, and their colors are not all the same. How to choose a suitable beautifying agent so that it can match the color of ceramic tiles harmoniously has stumped many owners. Today, the editor will introduce you some tips on the color matching of beauty seams!

We can use dark-colored tiles with light-colored caulk. Assuming that we have purchased black tiles, we can choose white for the beauty joint agent. Black and white, dark and light, dark green and light gray can all be used together in this way, and the layering of the overall paving is easier to highlight. For the same reason, you can also use light-colored tiles with dark-colored caulk. What should I do if the color of the tiles I bought is the same color as my favorite seam agent? rest assured! This combination is also possible.

Choosing a seam agent that is similar in color to the tile can reduce the presence of tile seams and make the overall space effect more coordinated, such as: dark gray and light gray, dark yellow and light yellow, black gray, etc.

How to match the colors of tiles and beautiful seams?

Recommendation 1: Match the same color, such as the matching of light yellow brick and dark yellow beauty joint agent, black brick and gray beauty joint agent.

Recommendation 2: Match dark tiles with light-colored beautifiers, such as black and white, dark and light, dark green and light gray.

Suggestion 3: The combination of cool and warm colors. The relationship between cool and warm colors depends on contrast, which is produced by people's natural life experience, and the combination is also very distinctive

Recommendation 4: Matching similar colors, such as yellow brick and green beautifier, red brick and purple beautifier, red brick and orange beautifier, orange brick and yellow beautifier.

Recommendation 5: Matching contrast colors, such as red and green, yellow and purple, blue and orange, black and white.

Recommendation 6: Match infinite colors with colors. Black, white, gold, silver, and gray are called infinite colors. They can be matched with any color.

As long as you have mastered the matching skills of tile beauty joint agent, the effect of your home beauty joint agent home improvement is absolutely praised.

Dry goods: Tips for matching beautiful seams on tiles

The products are available in a variety of colors, how to match our tiles better, what color tiles and which color of the beautiful sewing products are more suitable? The following editor will explain in detail for everyone.

Generally, there are two ways to choose the color of beautiful seam. One is the close method, which is to choose the beautiful seam product that is closer to the color of the tile; the second is the contrast method, where the color and the color of the tile are selected to form a strong contrast. Contrast and complement each other. White with gold, white with beige, green with blue, white with gray, gray with black, these are relatively plain color combinations; white with black, red with black, white with red, white with purple, white with blue and white With green, yellow and blue, these are the more prominent color combinations; brown with black, brown with red, blue with black, blue with dark green, these are darker color combinations; green with yellow, orange with green , Red with gold, white with gold, white with red, purple with red, these are the more lively matching colors; black with white, gray with white, black with red, gold with black, gold with red, blue with transparent Color, silver with red, silver with green, these are more atmospheric color combinations; white with brown, brown with red, earth yellow with red, yellow with coffee, these are more traditional color combinations; blue with white and green With white, green with yellow, gray with green, these colors will feel more fresh when matched.

Generally, white or light colors are recommended for kitchen and bathroom. White gives a clean and neat feeling, which meets the needs of kitchen and bathroom.

For the background wall of the living room, if it is a beige tile, it is recommended to use the golden series of beauty joint agents, which will look very atmospheric and beautiful.

If it is a black series or antique brick tiles, you can also choose the golden series to match, which looks solemn and the effect is good.

The pale white tiles work well with the silver series of beautifying agents.

In general, the colors of beauty seams commonly used in home decoration are white and gold, which are basically versatile. The beauty seam effect is also obvious. The specific choice depends on personal preference. Yixinjumei seam can satisfy your various dreams. demand.

It should be noted that if you want to match the noble gold, luxury gold and other large sequined real porcelain glue, the tile gap construction width is greater than 2MM to show the effect, so the gap should be reserved in advance before color matching.

If you encounter a tile color that you don't understand and don't know how to match, you can also consult us in the message area or over the phone in time. A technical teacher will answer your questions 24 hours a day. support hotline:

Precautions! ! !

1. As a seamstress, you must understand the attributes of the major tiles, such as material, fabric, glaze or concave and convex, etc. Knowing these will make you more comfortable when doing beautiful sewing. For example: all polished glazed tiles do not need to be waxed, but antique tiles must be waxed. Because the beauty joint agent sticks to the antique tiles, if the beauty joint agent is cured, it is difficult to clean up. For the fully polished tiles, you can wait for the beauty joint agent to dry after the beauty joint agent is applied and remove it with a spatula. It will feel particularly beautiful after completion.

2. Be sure to understand the curing time and use environment of the beauty seam in spring, summer, autumn and winter. Nowadays, some widely used beauty joint agents on the market, such as real porcelain glue, cure on the surface about 4 hours after construction, and it takes 24 hours to fully cure. If the temperature is lower in winter, the curing time will be extended by 2-4 Times, the complete curing time will be extended accordingly. Generally, in spring and early summer and autumn, the curing time of the beauty joint agent is 24 hours. To the end of autumn and winter when the temperature is lower, the curing time of the beauty joint agent will be extended to about 48 hours. The lower the temperature, the more difficult it is to cure the beauty joint agent. Therefore, you must manage the doors and windows when making beautiful seams to avoid other external factors affecting the beautiful seam effect.

3. Seamless tiles also need to leave seams and make beautiful seams. There must be gaps for tile paving. This is already a common topic, and seamless bricks are no exception, but the size of the reserved brick gaps. If the tiles do not leave gaps, once thermal expansion and contraction occur, the tiles will bulge and cause porcelain collapse. There is also a place where there are heating pipes under the ground in the northern area. You must leave enough gaps when laying tiles to avoid problems with the ground during heating. Then there are people who use floor heating. If you lay tiles, you must pay attention to these. Seamless The brick does not need to leave seams, and seamless bricks also need to be treated with seams.

4. Be sure to abandon the first 30cm when playing the US sewing glue. Now what we often use is two-component beautifying agent. Two-component beautifying agent is divided into curing agent and pigment. These two materials are separated in the bottle, mixed through the mixing tube, and extruded by the glue gun. Be sure not to use the first 20-30cm beauty seam agent, because if the two materials are not completely mixed, it will not be cured, let alone the subsequent beauty seam effect.

5. When making the beautiful seam construction, the beautiful seam material can be used up in one construction, if it is really not used up, then the bottle cap must be tightened to keep it in a sealed state, otherwise it will wait for the next time you use the beautiful seam agent It becomes as hard as a tile. Because the seam agent will be cured directly without the sealing treatment, the seam agent that cannot be used up must be sealed. In addition, during construction, you must avoid eye splashing and long-term contact with the skin of incompletely cured materials, and do not let children come into contact with the skin. Nowadays, the popular sewing products on the market are real porcelain and water porcelain. Their main raw material is epoxy resin, and some people are naturally allergic to epoxy resin, so you must pay attention to safety.

Summary: Every time beauty stitching is a new understanding of ourselves, and society is progressing every moment. As a beauty stitcher, we should not stop learning. We must not only master the beauty stitching technology, but also learn more. The wider the future, the wider the future.

Method/Step

Tile beauty joint agent is a new type of high-tech polymer and high-grade pigments. It appears to replace the traditional white ash, cement, and ordinary color sealant. However, these tile grouts have several main functions to beautify the laying effect of tiles. So, in the current beauty sewing market, it is generally more expensive to find a master to perform beauty sewing. In the decoration, beauty stitching is not so difficult, you can do it yourself. Buying beauty stitching agents online will usually give you the tools you need for beauty stitching. The tools do seem to be more, but as long as you understand the steps, this is actually the case. simple.

The first step is to clean up the gaps. Clearing the gaps must be done before the beginning of the beautiful seam. When cleaning, there is a tool similar to a screwdriver, called a seam cleaning cone, which clears a groove about 2 cm deep in the gap between the tile and the tile, and then combines it with a brush and performs it at the same time. Clean up the mud and sand with a brush. If you have a vacuum cleaner at home, you can also use a vacuum cleaner, the effect will be better.

The second step is to paste the beautiful sewing paper. This step requires the patience of your friends. In the decoration, there are many beautiful sewing masters who will not do this, because it is more complicated, and more troublesome, time-consuming and laborious. In fact, the beauty seam paper is to make the beauty seam agent shape at one time, and it is more convenient to let the beauty seam agent fit into the groove. To paste beautiful seam paper, you need to paste it horizontally and vertically along the edge of the tile gap, and try to be parallel to the edge of the tile. Do not exceed the edge of the tile, so as not to cause the sealing material to be unable to fully adhere to the tile in the later stage. Of course, friends who use beautiful seam wax can omit this step, and only need to put beautiful seam wax on the edge of the gap to achieve the same effect.

The third step is to caulk the seams, and after the beautiful seam paper is pasted, the seams are officially filled. After inserting the hose into the beautifying agent, put it in the glue gun. Use a blade to incline 30 degrees to cut the rubber tube, and then punch out the beautifying agent about 30 cm in the idle place. This approach is to ensure that the beauty seam agent can fully maintain a sufficient state. If it is a double-barreled beauty sewing gun, it can also be better integrated. Then squeeze in directly along the gap of the beautiful seam paper. But we must pay attention, the force must be even. After it is completely filled, use a scraper to smooth the seam agent.

The fourth step is to tear the beautiful seam paper. The time to tear the beautiful seam paper is very important. After the seam agent is smoothed, it should be torn off immediately. If you wait for it to solidify, and then tear the seam paper, it is very likely that the seam agent will be brought out from the gap, leading to the failure of the later filling. Of course, friends who use beautiful sewing wax can omit this step.

In fact, it seems that there are many steps to fill the joints, but in general, you can get an overview in one sentence; one dozen, two scraping, three shoveling and four cleaning. If you understand the meaning of this sentence, it is actually very simple. I believe that you who are smart have also learned the skills of filling beauty joints.

I believe that the beauty seam masters have a better understanding of the basic beauty seam construction operations, but there are also many beauty seam masters who often consult about how to construct the yin and yang corners. Now I will explain in detail the steps of how to construct a few special places. I hope it will be helpful to you.

1. Inner corner refers to the recessed corner of the wall, also called the inner corner, such as the four corners of the room, or the place where the wall and the ground intersect.

Gluing: When constructing the vertical internal corner, align the glue port of the beauty joint to the gap. The high part of the internal corner needs to be glued from top to bottom, and the low part should be glued from bottom to top. For the horizontal internal angle, the glue should be inclined at a certain angle when glueing, but the glue mouth must be facing the gap before glueing.

Press seam: When press seam, you need to press in one direction. Use the internal corner creasing tool. If you don’t have one, you can use an ice cream stick that fits the internal corner size. Generally, the internal corner creasing tool is relatively small.

2. Yang angle refers to the protruding corner of the wall.

Gluing: The method of glueing the male corners is the same as that of the female corners. It needs to be aligned with the gap and then glued evenly.

Press seam: There are many types of male angle press seams, including rounded, flat, and right-angled. When pressing the male angle, there are also pressing tools, which can be used to press round and right angles. These two have their own characteristics. Generally, it is recommended to make a round male angle. If there is a large gap between the external corner tool or the external corner, you can also use an ordinary creasing tool to squeeze a flat corner.

3. Cross corner construction:

Gluing: When passing the cross angle, the speed of gluing needs to be slowed down to allow enough beauty joint agent to enter the gap.

Pressing seam: The pressing seam of the cross angle is divided into two steps; the first step is to press down along the gap at one time, first vertical and then horizontally; the second step, starting from the intersection point, perform pressure seam repair around. When pressing the seam, be sure not to press the seam back and forth, especially at the intersection.

4. Intersection construction:

Glue: When gluing, follow one's own direction first and then horizontal, slow down when encountering the intersection, let the colloid enter the gap.

Pressing seam: The method of pressing the joint at the intersection is the same as that of the cross angle. A second pressing must be carried out, and the second repair starts from the intersection and starts outward.