1. Can I still use half of the beautifying agent?

The beauty seam products produced by regular manufacturers are all healthy and environmentally friendly, and the properties of their materials are relatively stable and will not be easily affected by the environment. However, it must be placed in a cool and dry place when storing, and remember to avoid direct sunlight, and the used beautifying agent must be removed and replaced with a tube head and tightened to prevent the beautifying agent from contacting with air and oxidizing. Replace the hose when you use it next time, and use it after 30cm-40cm is the same. However, any product has a certain storage period and must be used up within the warranty period. It is recommended to use it up at one time, so I remind everyone that when making beautiful joints at home, please consult us clearly about the size of the gap in the home, what is the area, how much you need to use, and then buy it, which will not waste or save unnecessary trouble.

2. How many square meters can a set of beauty joints make?

The amount of beauty joint agent depends on the size of the floor tiles. The reserved tile gaps are all related. The larger the tile gap, the more the loss of the beauty joint agent (the dosage table is attached)

Dosage Brick joint 1MM 1.5MM 2MM 2.5MM 3MM

Tile size

800*800MM 21㎡/group 17.00 14.00 11.00 8.50

600*600MM 16㎡/group 13.00 11.00 8.50 6.00

400*800MM 14㎡/group 12.00 11.00 7.50 5.50

500*500MM 13㎡/group 11.00 10.00 7.00 5.00

300*600MM 10.5㎡/group 8.50 8.00 5.50 4.00

400*400MM 10.5㎡/group 8.50 9.00 5.50 4.00

300*300MM 8㎡/group 6.50 6.00 4.00 3.00

200*200MM 5㎡/group 4.00 3.50 2.50 2.00

100*100MM 2.5㎡/group 2.00 1.80 1.50 1.00

50*50MM 1.5㎡/group 1.00 0.80 0.60 0.50

3. How to distinguish between good and bad beauty seams?

It can be distinguished from the aspect of smell first, there is a pungent smell, indicating that the product has more harmful gases, and then from the aspect of color and luster, after the seam agent is dry, the gloss is good, relatively smooth, and it looks shiny from a distance, and you can see the beauty The hardness of the grout should be soft and rigid, with good toughness.

4. It is difficult to apply beauty seam agent to glue?

Reason 1: Check whether the seam agent in the mixed glue nozzle has been cured. Generally, if we pause for about 15 minutes during the sizing process, the beauty joint may be semi-cured or cured, which will block the glue nozzle and cause difficulty in dispensing. This requires us to replace the new mixing nozzle;

Reason 2: Check if the glue nozzle cut is too small. Generally, we will cut the corresponding 45° bevel according to the width of the tile gap. When the incision is too small, it will be more difficult to apply the glue. Therefore, the beauty joint construction is really a physical task. Don't be blindly confident. It is recommended that friends with poor physical fitness can ask the construction master to carry out the construction.

Reason 3: The beauty joint agent is also affected by the characteristics of thermal expansion and contraction, so generally when the external environment temperature is relatively low, the curing agent will be more stiff and sticky and difficult to extrude. At this time, we can use warm water at 50-60℃ to heat it. It should be noted that the beautifying agent needs to face up and the warm water should not flow over two-thirds of the bottle.

Reason 4: If the pressure control knob of the glue gun is too small, it will cause the glue gun to fail to discharge the material. You can slowly turn the knob to large in the direction indicated by the "+" sign and try the gun again;

Reason 5: The quality of the glue gun is not good enough. If it is an inferior glue gun, how can the glue gun not have enough pressure to make it effortlessly? So a good glue gun can save us a lot of effort in construction.

5. Which is better, water-based or oil-based beauty joint agent?

The stability and service life of water-based beautifiers are not as strong as that of oily beautifiers, and in terms of aesthetics, the oiliness is obviously better, because oily substances will make the gloss and brightness of the beautifier become higher, so no matter how polished Brick or glazed brick is very suitable.

6. How to match the colors of ceramic tiles and beautiful seams?

Recommendation 1: Match the same color, such as the matching of light yellow brick and dark yellow beauty joint agent, black brick and gray beauty joint agent.

Recommendation 2: Match dark tiles with light-colored beautifiers, such as black and white, dark and light, dark green and light gray.

Suggestion 3: The combination of cool and warm colors. The relationship between cool and warm colors depends on contrast, which is produced by people's natural life experience, and the combination is also very distinctive

Recommendation 4: Match infinite colors with colors. Black, white, gold, silver, and gray are called infinite colors. They can be matched with any color.

Generally speaking, the black, white, silver, and gray seam agents are more versatile and can be matched with tiles of various colors without being obtrusive.

If you want a strong contrast color, you can choose a color with a larger hue. In addition, the specific combination should also consider factors such as environment and personal preferences.

7. How long does it take for the tiles that have just been pasted to be beautiful?

1) In terms of time, there is generally a certain amount of standing and curing time after the paving is completed (the tile adhesive has a certain amount of moisture after the tile has just been pasted, and the beautiful seam will easily get damp if the seam is not dried. Causes whitening and shedding), after this time, the beauty sewing can be performed. The industry stipulates the time, generally after 7 days, the seam agent can be treated.

2) In terms of the order of the decoration process, since the beautiful joints of ceramic tiles have high requirements for the on-site construction environment, the beautiful joints of tiles are carried out after the construction processes that are prone to dust and stolen goods, such as water, electricity, woodworking, etc.

3) In addition, the temperature of the construction site should be kept at about 5-30C°. If you encounter successive rainy weather, you need to wait until the weather is clear before proceeding, so as to ensure the effect of the beautiful seam of the tiles.

4) The beautiful seam of tiles in the living room is generally before all the living room furniture enters the market, so that on the one hand, it can ensure the decoration effect of the beautiful seam, and on the other hand, it can also be easy to clean.

5) The bathroom and kitchen are one of the important functional areas in the home. After a week of standing, you can apply the beautifying agent. Remember to be before the ceiling to ensure the integrity of the beautifying.

8. What kind of tiles need masking paper or seam wax?

If the surface of the tile is very rough, it is not smooth at all (such as antique tiles, wood grain tiles). When making beautiful seams, the seamstresses will use masking paper or waxing to prevent the seam from directly hitting the tiles. Its main function is to protect the two sides of the seam during the seam. The tile surface is not polluted, and it can also bring a lot of convenience to cleaning. The beauty of seam wax only needs to use wax blocks to apply a uniform layer along the tiles on both sides of the gap. The operation is simple and practical, and the inherent characteristics of wax will also make the beauty seams more bright and beautiful. Compared with the seam wax, the operation of the masking paper is more troublesome. It must be accurately attached to the edge of the tile, which wastes a lot of construction time. At the same time, the operator will be very tired, but clean and hygienic It will be simpler, just tear off the textured paper.

9. Why doesn't the beauty sealant solidify for a long time after finishing?

1) Uneven mixing of beauty joints: Many people find that there is a section of uncured beauty joints at every interval when cleaning the remaining material after the beauty joint construction. This is the common reason why the beauty joints do not cure. During the construction of the joint agent, the glue nozzle is mixed unevenly. Because the double-tube beautifying agent is composed of two pipes of raw materials mixed, and the inside of the glue nozzle is a plastic head with a spiral, when the two pipes of raw materials pass through the nozzle tube, they are mixed together due to the action of the spiral, so that the beautifying agent produced Will be even. The first section of the beautifying agent that has just been punched out is easy to mix unevenly. Before the beautifying joint construction, the beautifying agent must be sprayed out of 30cm-40cm before starting the construction. This can be mixed evenly.

2) The quality of the beauty seam agent is poor. The beauty seam agent on the market is endless, and the quality is also uneven. The inferior beauty seam agent will be very thin and will not cure for a long time. This is because the raw material ratio of the beauty joint agent is not up to standard. In order to save costs, the epoxy resin, pigment, curing agent and other raw materials used are very cheap, especially the inferior curing agent, which is the main cause of the beauty joint agent not curing. . If you encounter a pungent, too thin beautifying agent, do not use it.

3) The indoor temperature is too low: If the indoor temperature is lower than 5℃ when performing beautiful joint construction in winter, the solidification will be slow after beautiful joint construction.

4) The tile gap is wet and not dry: If the tile gap is severely damp, the beautiful seam made will either be incompletely cured or turn white and discolor after curing. Because the beauty grout seals the tile gaps, the moisture in the tile gaps cannot be released, which will affect the curing of the beauty grout. Therefore, moisture is an important reason for the curing of the beauty grout. It is recommended to stop the construction immediately, open the doors and windows for ventilation, and wait for the humid environment to dry before doing the beauty joint construction, so that the beauty joint agent will not solidify and cause rework.

5) In addition to the above reasons, there is another problem that can easily be overlooked by the glue gun. There are four main screws on the front and back of the stretch rod of the glue gun. These four screws are the power of the glue gun. Once there is a screw If it is loosened, the output pressure of the glue gun will deviate severely during the construction of the glue gun, and the pressure on the left will be 70% and the pressure on the right will be 30%. That is to say, when discharging 70% of the material while discharging 30% of the material, there is no formation and the force is 100% each, which makes the discharging and mixing of the beauty joint agent uneven. Two-component beautifying agent is a combination of AB and two groups, which requires simultaneous force to discharge uniformly.

Under normal weather conditions, after the application of the beauty joint agent, the initial curing can be achieved in 4-6 hours, and the complete curing can be achieved within 24 hours (the time will be extended in winter when the temperature is lower)