1. Can I still use half of the beautifying agent?

The beauty seam products produced by regular manufacturers are all healthy and environmentally friendly, and the properties of their materials are relatively stable and will not be easily affected by the environment. However, it must be placed in a cool and dry place when storing, and remember to avoid direct sunlight, and the used beautifying agent must be removed and replaced with a tube head and tightened to prevent the beautifying agent from contacting with air and oxidizing. Replace the hose when you use it next time, and use it after 30cm-40cm is the same. However, any product has a certain storage period and must be used up within the warranty period. It is recommended to use it up at one time, so I remind everyone that when making beautiful joints at home, please consult us clearly about the size of the gap in the home, what is the area, how much you need to use, and then buy it, which will not waste or save unnecessary trouble.

2. How many square meters can a set of beauty joints make?

The amount of beauty joint agent depends on the size of the floor tiles. The reserved tile gaps are all related. The larger the tile gap, the more the loss of the beauty joint agent (the dosage table is attached)

Dosage Brick joint 1MM 1.5MM 2MM 2.5MM 3MM

Tile size

800*800MM 21㎡/group 17.00 14.00 11.00 8.50

600*600MM 16㎡/group 13.00 11.00 8.50 6.00

400*800MM 14㎡/group 12.00 11.00 7.50 5.50

500*500MM 13㎡/group 11.00 10.00 7.00 5.00

300*600MM 10.5㎡/group 8.50 8.00 5.50 4.00

400*400MM 10.5㎡/group 8.50 9.00 5.50 4.00

300*300MM 8㎡/group 6.50 6.00 4.00 3.00

200*200MM 5㎡/group 4.00 3.50 2.50 2.00

100*100MM 2.5㎡/group 2.00 1.80 1.50 1.00

50*50MM 1.5㎡/group 1.00 0.80 0.60 0.50

3. How to distinguish between good and bad beauty seams?

It can be distinguished from the aspect of smell first, there is a pungent smell, indicating that the product has more harmful gases, and then from the aspect of color and luster, after the seam agent is dry, the gloss is good, relatively smooth, and it looks shiny from a distance, and you can see the beauty The hardness of the grout should be soft and rigid, with good toughness.

4. It is difficult to apply beauty seam agent to glue?

Reason 1: Check whether the seam agent in the mixed glue nozzle has been cured. Generally, if we pause for about 15 minutes during the sizing process, the beauty joint may be semi-cured or cured, which will block the glue nozzle and cause difficulty in dispensing. This requires us to replace the new mixing nozzle;

Reason 2: Check if the glue nozzle cut is too small. Generally, we will cut the corresponding 45° bevel according to the width of the tile gap. When the incision is too small, it will be more difficult to apply the glue. Therefore, the beauty joint construction is really a physical task. Don't be blindly confident. It is recommended that friends with poor physical fitness can ask the construction master to carry out the construction.

Reason 3: The beauty joint agent is also affected by the characteristics of thermal expansion and contraction, so generally when the external environment temperature is relatively low, the curing agent will be more stiff and sticky and difficult to extrude. At this time, we can use warm water at 50-60℃ to heat it. It should be noted that the beautifying agent needs to face up and the warm water should not flow over two-thirds of the bottle.

Reason 4: If the pressure control knob of the glue gun is too small, it will cause the glue gun to fail to discharge the material. You can slowly turn the knob to large in the direction indicated by the "+" sign and try the gun again;

Reason 5: The quality of the glue gun is not good enough. If it is an inferior glue gun, how can the glue gun not have enough pressure to make it effortlessly? So a good glue gun can save us a lot of effort in construction.

5. Which is better, water-based or oil-based beauty joint agent?

The stability and service life of water-based beautifiers are not as strong as that of oily beautifiers, and in terms of aesthetics, the oiliness is obviously better, because oily substances will make the gloss and brightness of the beautifier become higher, so no matter how polished Brick or glazed brick is very suitable.

6. How to match the colors of ceramic tiles and beautiful seams?

Recommendation 1: Match the same color, such as the matching of light yellow brick and dark yellow beauty joint agent, black brick and gray beauty joint agent.

Recommendation 2: Match dark tiles with light-colored beautifiers, such as black and white, dark and light, dark green and light gray.

Suggestion 3: The combination of cool and warm colors. The relationship between cool and warm colors depends on contrast, which is produced by people's natural life experience, and the combination is also very distinctive

Recommendation 4: Match infinite colors with colors. Black, white, gold, silver, and gray are called infinite colors. They can be matched with any color.

Generally speaking, the black, white, silver, and gray seam agents are more versatile and can be matched with tiles of various colors without being obtrusive.

If you want a strong contrast color, you can choose a color with a larger hue. In addition, the specific combination should also consider factors such as environment and personal preferences.

7. How long does it take for the tiles that have just been pasted to be beautiful?

1) In terms of time, there is generally a certain amount of standing and curing time after the paving is completed (the tile adhesive has a certain amount of moisture after the tile has just been pasted, and the beautiful seam will easily get damp if the seam is not dried. Causes whitening and shedding), after this time, the beauty sewing can be performed. The industry stipulates the time, generally after 7 days, the seam agent can be treated.

2) In terms of the order of the decoration process, since the beautiful joints of ceramic tiles have high requirements for the on-site construction environment, the beautiful joints of tiles are carried out after the construction processes that are prone to dust and stolen goods, such as water, electricity, woodworking, etc.

3) In addition, the temperature of the construction site should be kept at about 5-30C°. If you encounter successive rainy weather, you need to wait until the weather is clear before proceeding, so as to ensure the effect of the beautiful seam of the tiles.

4) The beautiful seam of tiles in the living room is generally before all the living room furniture enters the market, so that on the one hand, it can ensure the decoration effect of the beautiful seam, and on the other hand, it can also be easy to clean.

5) The bathroom and kitchen are one of the important functional areas in the home. After a week of standing, you can apply the beautifying agent. Remember to be before the ceiling to ensure the integrity of the beautifying.

8. What kind of tiles need masking paper or seam wax?

If the surface of the tile is very rough, it is not smooth at all (such as antique tiles, wood grain tiles). When making beautiful seams, the seamstresses will use masking paper or waxing to prevent the seam from directly hitting the tiles. Its main function is to protect the two sides of the seam during the seam. The tile surface is not polluted, and it can also bring a lot of convenience to cleaning. The beauty of seam wax only needs to use wax blocks to apply a uniform layer along the tiles on both sides of the gap. The operation is simple and practical, and the inherent characteristics of wax will also make the beauty seams more bright and beautiful. Compared with the seam wax, the operation of the masking paper is more troublesome. It must be accurately attached to the edge of the tile, which wastes a lot of construction time. At the same time, the operator will be very tired, but clean and hygienic It will be simpler, just tear off the textured paper.

9. Why doesn't the beauty sealant solidify for a long time after finishing?

1) Uneven mixing of beauty joints: Many people find that there is a section of uncured beauty joints at every interval when cleaning the remaining material after the beauty joint construction. This is the common reason why the beauty joints do not cure. During the construction of the joint agent, the glue nozzle is mixed unevenly. Because the double-tube beautifying agent is composed of two pipes of raw materials mixed, and the inside of the glue nozzle is a plastic head with a spiral, when the two pipes of raw materials pass through the nozzle tube, they are mixed together due to the action of the spiral, so that the beautifying agent produced Will be even. The first section of the beautifying agent that has just been punched out is easy to mix unevenly. Before the beautifying joint construction, the beautifying agent must be sprayed out of 30cm-40cm before starting the construction. This can be mixed evenly.

2) The quality of the beauty seam agent is poor. The beauty seam agent on the market is endless, and the quality is also uneven. The inferior beauty seam agent will be very thin and will not cure for a long time. This is because the raw material ratio of the beauty joint agent is not up to standard. In order to save costs, the epoxy resin, pigment, curing agent and other raw materials used are very cheap, especially the inferior curing agent, which is the main cause of the beauty joint agent not curing. . If you encounter a pungent, too thin beautifying agent, do not use it.

3) The indoor temperature is too low: If the indoor temperature is lower than 5℃ when performing beautiful joint construction in winter, the solidification will be slow after beautiful joint construction.

4) The tile gap is wet and not dry: If the tile gap is severely damp, the beautiful seam made will either be incompletely cured or turn white and discolor after curing. Because the beauty grout seals the tile gaps, the moisture in the tile gaps cannot be released, which will affect the curing of the beauty grout. Therefore, moisture is an important reason for the curing of the beauty grout. It is recommended to stop the construction immediately, open the doors and windows for ventilation, and wait for the humid environment to dry before doing the beauty joint construction, so that the beauty joint agent will not solidify and cause rework.

5) In addition to the above reasons, there is another problem that can easily be overlooked by the glue gun. There are four main screws on the front and back of the stretch rod of the glue gun. These four screws are the power of the glue gun. Once there is a screw If it is loosened, the output pressure of the glue gun will deviate severely during the construction of the glue gun, and the pressure on the left will be 70% and the pressure on the right will be 30%. That is to say, when discharging 70% of the material while discharging 30% of the material, there is no formation and the force is 100% each, which makes the discharging and mixing of the beauty joint agent uneven. Two-component beautifying agent is a combination of AB and two groups, which requires simultaneous force to discharge uniformly.

Under normal weather conditions, after the application of the beauty joint agent, the initial curing can be achieved in 4-6 hours, and the complete curing can be achieved within 24 hours (the time will be extended in winter when the temperature is lower)

Now decorating a house is really a chore. The complexity of decoration materials on the market and the variety of decoration styles can make people tangled for a long time. Especially in the past, the floor tiles may be simply filled with white cement, but now they are all popular!

Beautiful seam for tiles is a popular decoration operation in recent years. After the tiles are filled with seam agent, there will be no blackening phenomenon even after a long time, and the appearance is more beautiful. . However, the prices of beauty sutures on the market today are different, how to ensure the quality? Now I will teach you 5 tricks so that you will not be easily deceived!

1. From the smell

Odor is a good way to identify the quality of beauty joints. Because the beauty seam agent itself is a kind of chemical agent, it will definitely be mixed with the smell of some chemical reagents. If your home is in the beauty seam, the pungent smell is very strong, which shows the quality of the beauty seam agent Poor. Because the better seam agent has little smell. Therefore, to identify the quality of the beauty suture, everyone can smell it.

2. From the perspective of viscosity

Because the beauty seam agent itself is colloidal, it will have a certain degree of adhesion. At this time, a good seam agent will be more viscous and sticky, so that the seam agent will have a longer service life, and there is no need to worry about moldy for a long time. On the contrary, the thinner seam agent is inferior because it has no viscosity at all and will fall off very quickly.

3. From the perspective of coagulability

After the construction of the beauty grout is completed, it is equivalent to solidification in the cracks of the tiles. This time is the time to test the quality of the beauty grout. We can squeeze a little beautifying agent on the outside, and wait until it is naturally air-dried to observe its coagulability. If it is harder, it is of better quality. On the contrary, the soft and collapsed type is not good at preventing mildew. Will have a good effect

4. From the perspective of gloss

The sensuality of the beautiful seam of tiles is to look more beautiful. At this time, if the gloss of the beautiful seam is better, it will look shining from a distance, but the poorer quality seam will not look It's very bright, and it may start to slowly become black after a long time, so that it does not play a role in beautiful sewing at all.

5. From the perspective of contractility

The beautiful seams are concentrated in the gaps of the tiles. After we apply the beautiful seam agent, the solvent will gradually shrink inward by itself and then solidify in the gaps. In this case, if the shrinkage is too large, the quality of the seam agent is problematic, and if it is relatively small, the quality will be considerable.

Most owners will choose ceramic tiles as facing materials for walls and floors, especially in kitchen and bathroom spaces. Tiles will have gaps when they are laid, so why are there gaps when laying tiles? How to deal with this tile gap? For tile gaps, the commonly used jointing materials now include cement, jointing agent and putty powder, among which putty powder and white cement are more traditional joint filling materials, and most of them are now used on cultural tiles for balcony paving. Many balcony tiles use ordinary cement mortar directly when paving. The main reason is that the waterproof performance and scrub resistance of putty powder and white cement are worse than the jointing agent. Nowadays, people use less, especially in the wall and floor of the kitchen and bathroom, and the floor of the living room. Most of them choose tile grout, such as ACI Baomei grout.

Aicibaomei seam agent adopts a unique plastic bottle container to match the static mixing nozzle. After the glue is squeezed by the glue gun, the glue is fully mixed, and the reaction solidifies and forms. After forming, it can achieve the effect of high hardness and strong adhesion. At the same time, it has the advantages of non-shrinkage, non-mold, washable, resistant to blisters, oil, acid and alkali, and aging. It is suitable for all kinds of gaps in counters, window sills, furniture, cabinets, kitchen corners, bathroom corners, and can also be used to paste various hard materials. It can be used with the color of tiles. It can be glued and waterproof. mold.

1. Floor heating has no effect on the beauty joints. The high temperature resistance of the beauty joints is 100 degrees Celsius, so even if the floor heating is installed in your home, you can safely make beautiful joints. Just use real porcelain with excellent flexibility and will not cause tile tension. porcelain.

2. The requirements for beautiful seam construction are dry, and dust-free. Many processes in home improvement will generate a lot of dust, such as painting, ceiling, wallpaper and so on. Therefore, the beauty joint construction time is before these dust-prone processes. Otherwise, there will be too much dust in the gap, and it will be troublesome to clean up, and the construction effect will not be good.

3. The beauty joint agent should be stored in a cool, dry and ventilated warehouse at 5℃-35℃, and the construction temperature should be within the range of 15℃-30℃. If the temperature is too low, it will hinder the loss of water and solidification of the material due to slow evaporation of water or freezing; if the temperature is too high, the solidification effect will be affected due to the fast evaporation of water.

4. Beautiful seam agent must use seam wax or paste seam paper on antique tiles. Because the surface of antique bricks is hard to clean after curing. The time to tear the seam paper is very important. After the seam agent is smoothed, it should be torn off immediately. Friends who use beautiful seam wax can omit this step and only need to put the beautiful seam wax on the edge of the gap to achieve the same effect.

5. If you find that the product is difficult to produce, you might as well soak the product in warm water for half an hour before using it. After the product is taken out of the water, wipe the appearance clean before using it to avoid dripping into the cracks and affect the construction effect.

6. After cleaning the tile gap, use a vacuum cleaner to clean the gap again. Then, wipe the gap and both sides with a semi-dry towel, and then start construction.

7. In the process of cleaning tile gaps, use a brush to clean up the dust. When the brush is cleaning dust, it must follow the gap, sweep to both sides, and then gather it together to clean it up.

8. Before punching the material of the beautiful sewing product, be sure to punch out about 30cm of material and discard it, and then drive it into the gap. When a set of products is finished, when replacing a new product, the mixing tube must be replaced with a new one. At the same time, the 30CM material at the front end must be discarded.

9. When performing seaming work, whether using a seaming ball, a seaming rod, or a squeegee, after pressing the seam once, wipe the seam-beauty agent on the seam ball or the squeegee clean, and then Return to the gap for a second press.

10. The punching is done in a straight line shape. For the places that are not hit or not full, you must re-punch. If you hit too much material, you can clean up, but if there is less material, there will be gaps or failures. Leveling will affect the construction effect.

11. For the beautiful seam treatment of tile gap intersections or T-shaped intersections, first press in one direction, and then place the steel ball in the center of the cross angle to press in the other direction respectively. When the steel ball is started, the handle angle is increased and the lifting is accelerated. Reduce the concavity of the joint at the start of the steel ball.

12. After the seam and seam are all finished, the site must be protected before it is completely cured. Do not step on the seam at will, let alone step on the finished seam, otherwise you will have to clean up and re-construct.

13. The curing time of beautiful sewing products is affected by environment and temperature. The normal curing time is about 6-8 hours for early drying in summer and about 10 hours for early drying in winter. But it will cure within 24 hours normally. Therefore, the remaining material should not be cleaned for more than 24 hours.

14. If there is still part of the two-component beauty joint agent that does not dry after 24 hours, the main reason is that the epoxy resin and the curing agent are not completely mixed, causing it to not dry. Generally, there is no need to wait in this case, because this This situation is impossible to dry any more, you can only pick up the un-done and re-apply. This is a normal phenomenon of two-component beauty joint agent. It is recommended not to finish the construction at one time, leaving some remaining material for repair.

15. Make the tile joints for beautiful seams and take care of them in life. Do not poke with sharp objects and avoid strong acid and alkali substances, otherwise it will destroy the components of the seam and affect the service life of the seam.